Commax DRC-MSC User's Guide

a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, KoreaInt’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133Web site :

89First set the ID number sequence for the multi-entry unit to “0”. After each multi-entry unithas been installed, the user must program the building

173)System diagramCH213. SpecificationItem Content(DRC-MSC/MSB)To Build Distributor: 8-wire(talk 2, Data 2, Video 2, Power 2)Duplex System128x64 GRAPH

162) Wiring- Please pay attention to the polarity of the wires. Units will not work properly when mis-wired - When using a UTP(CAT.5) cable, be sure t

1517) With this data, you can make use of the “modify”, ”Add” functions in this program and select “ SEND ” to complete.1) Wiring Diagram13. Wiring an

1412) “Completed sending” message is displayed as above, select (Y).(When “LOBBY Not connected” message is displayed, please recheck the cable connec

41) LCD size : 128x 64 (key pad type)2) Connecting Door Bell type for an individual door.3) Connectable to up to 4 units per building 4) Night autom

123) Set the dip switches of Building Distributor to match its assigned ID.4) Run “NAME TOOL_200.exe” file.5) Select the Building ID in “ Select No ”.

6No. Contents No. Contents1 C-MIC 10 Power status and Light night lamp2 Lamp for CCD Camera 11 Dial button3 CDS Sensor 12 Key4 CCD Camera 13 Cancel bu

101) Changing Resident Password1. Hold “Residence Number” and “Key button for 2 seconds and release when LCD stops blinking.2. Enter “Curr